Controllerless Networks

Reply
Occasional Contributor I

How to remove device without access to Aruba Central?

So I got IAP-105 off eBay and wiped the existing config and upgraded the firmware but after approximately 5 minutes the device auto connects to Aruba Central and replaces the default config and locks me out of the management interface.

 

How do I stop Aruba Central getting hold of the device so I can essentially set it up from scratch and use it?

 

 

Many thanks.

Re: How to remove device without access to Aruba Central?

Speak to TAC, I've had this previously and they removed the IAP from the previous customers Central Account. Either that or block http/https outbound for the IAP but this isn't really a practical solution.


ACMA, ACMP, ACSA
If my post addresses your query, give kudos:)
Aruba Employee

Re: How to remove device without access to Aruba Central?

Hi Adrian,

 

The best path is to open a TAC case so that we can trace the account for the previous owner of this device.

 

Once that is done, changes can be done in the background to ensure the device does not connect back to Central.

 

By any chance, if device was sold by the previous owner himself, you can request him to unlicense it from their Central account in case you are in touch with them.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: