Controllerless Networks

Reply
New Contributor

I-225 and .PEM Certificate

Hello,

 

I have been trying to upload a self-signed PEM certificate generated in OpenSSL, but every time I try to upload the file, I get the following error message. 

PEM.PNG

 

The certificate was generated using the following command on Ubuntu 16.04

openssl req -x509 -sha256 -newkey rsa:2048 -keyout self_cert.pem -out self_cert.pem -days 1825

 

as per post here: https://community.arubanetworks.com/t5/Controller-Based-WLANs/Generate-self-signed-certificate-with-OpenSSL/ta-p/275357

 

The content of the certificate appears to be correct, although I am no expert in this matter. 

 

-----BEGIN ENCRYPTED PRIVATE KEY-----

[ CONTENT ] 

-----END ENCRYPTED PRIVATE KEY-----
-----BEGIN CERTIFICATE-----

[CONTENT ]
-----END CERTIFICATE-----

 

Can anyone point me in the right direction?

 

Many thanks,

pipboy-2000

Re: I-225 and .PEM Certificate

Hi Fallout Fan, :)

 

The guide you're working from is for controllers.

 

Here's the Instant certificate guide.

 

 

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: