Controllerless Networks

Reply
New Contributor

IAP 103 broadcasting low (54) mbps rates.

Hi people,

 

Im created 3 IAP103 AccessPoints to use for Site Surveys.

 

What happend is that I created a normal SSID with both 2,4ghz and 5 ghz enabled, I disabled the option that will disable the SSID when there is no link on the port, that all works.

 

Now, when I check the SSID's it sends out (through Ekahau with an NIC300 WLAN adapter), now what I see is this:

 

 

Knipsel.PNG

 

In the Image above you see there are the configured 40mhz 5ghz channel and the 2,4ghz 11n channel. But where do the 54Mbps ssids come from?

 

 

 

Guru Elite

Re: IAP 103 broadcasting low (54) mbps rates.

Patrick s,

 

Why not connect to it and see what rate your client gets...

 

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
New Contributor

Re: IAP 103 broadcasting low (54) mbps rates.

Its not about what the clients are connected with, these AccessPoints are only for Survey means.

 

Normaly it never shows those low rates. I just after I gave it a factory reset it started broadcasting those SSID's. I just want to know what caused this or how to disable them.

Guru Elite

Re: IAP 103 broadcasting low (54) mbps rates.

Patrick s,

 

Without connecting a client to the survey SSID or using another application to view the rates that are displayed, we cannot really explain why Eckahau is reporting those rates.

 

EDIT:

 

Please use INSSIDER, packet capture tool or another program to see if still reports it as 54 so that we can determine if there is a bug in the AP103 or if there is an issue with Eckahau.

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: