Hi,
I have a few IAP-103 access points that were recently upgraded and are no longer allowing me to login to the GUI. If I connect a console cable to them they boot successfully and then start displaying "turn off mobility" over and over. These are IAP-103s with the model # APIN0103. Can anyone help please.
Here is the output from the CLI:
APBoot 1.5.3.21 (build 47715)
Built: 2014-12-17 at 19:19:51
Model: AP-103
CPU: AR9344 revision: 1.2
Clock: 560 MHz, DDR rate: 429 MHz, Bus clock: 214 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 32 MB
Power: 802.3af POE
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0033 00002 01 10000004 00000000 00000000 00000000
Net: eth0
Radio: ar9590#0, ar9344#1
Hit <Enter> to stop autoboot: 0
Booting OS partition 0
Checking image @ 0xbf100000 (bank 1)
Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
ELF file is 32 bit
Loading .text @ 0x81c00000 (8611832 bytes)
Loading .data @ 0x82436800 (32 bytes)
Clearing .bss @ 0x82436820 (16 bytes)
## Starting application at 0x81c00000 ...
Uncompressing...................................................................................
Aruba Networks
ArubaOS Version 6.4.2.6-4.1.3.2 (build 56106 / label #56106)
Built by p4build@chios on 2016-08-15 at 03:33:19 PDT (gcc version 4.3.3)
CPU Rev: 2122
934x CPU
flash_size passed from bootloader = 32
arg 1: mem=128M
Flash variant: 32M
ath_sys_frequency: cpu apb ddr apb cpu 560 ddr 429 ahb 214
Cache parity protection disabled
ath_timer_init: plat time init done
Using 280.000 MHz high precision timer. cycles_per_jiffy=560000
Memory: 118016k/131072k available (1698k kernel code, 12960k reserved, 673k data, 7712k init, 0k highmem)
available.
detected lzma initramfs
initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=34441728
LZMA initramfs by Ming-Ching Tiew <mctiew@yahoo.com> ..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
PCI init:ath_pcibios_init
Returning IRQ 64
ATH GPIOC major 0
wdt: registered with refresh
Enabling Watchdog
Talisker RSSI LED initialization
Concatenating MTD devices:
(0): "bank1"
(1): "bank2"
into device "flash"
Creating 1 MTD partitions on "flash":
0x00000000-0x02000000 : "flash"
i2c /dev entries driver
i2c-talisker: using default base 0x18040000
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT
Starting Kernel DES KAT ...Completed Kernel DES KAT
Starting Kernel AES KAT ...Completed Kernel AES KAT
Starting Kernel AESGCM KAT ...Completed Kernel AESGCM KAT
Domain Name: instant.arubanetworks.com
No panic info available
Backup ENV.
ATHR_GMAC: RX TASKLET - Pkts per Intr:16
ATHR_GMAC: Mac address for unit 0:80b0abc0
ATHR_GMAC: 94:b4:0f:cf:6c:8e
ATHR_GMAC: Mac capability flags : 42201
ATHR_GMAC: RX TASKLET - Pkts per Intr:16
ATHR_GMAC: Mac address for unit 1:80b0abc0
ATHR_GMAC: 94:b4:0f:cf:6c:8f
mac:1 Registering S27....
ATHR_GMAC: Mac capability flags : 42A00
athrs17_reg_init:done
Phy setup Complete
Cfg len is 0
Configuration file is empty, turning on default services...
extended ssid activate due to no AP config ...
disable auto topology rules
Starting up in standalone mode
drvlog_mod: module license 'Proprietary' taints kernel.
AP xml model 76, num_radios 2 (jiffies 15240)
init_asap_mod: installation:0
radio 0: band 1 ant 0 max_ssid 16
radio 1: band 0 ant 0 max_ssid 16
election init: rand=a HZ=500
IAP client match init
notify asap_mod 3g no present...
notify asap standalone ap...
Starting watchdog process...
Got all network params from APboot env. Skippingathrs17_reg_init:done
DHCP
Setting PHY...
Phy setup Complete
ADDRCONF(NETDEV_UP): bond0: link is not ready
10.35.21.25 255.255.255.0 10.35.21.1
Compressing all files in the /etc/httpd directory...
Enet:0 port0 up
athr_gmac_poll_link: unit 0 link change to up
ATH_MAC_TIMER: enet unit:0 is up...
Mii 1000Mbps full duplex
ATH_MAC_TIMER: Done cfg2 0x7235 ifctl 0x0 miictrl
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
ip_time_handler: Got ip and packets on bond0 Started master election 1-0, rand 24
drvlog_mod: module license 'Proprietary' taints kernel.Done.
Starting Webserver
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
Launching NTP Client on pool.ntp.org
ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_rate_atheros: Aruba Networks Rate Control Algorithm
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_spectrum: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
Restoring Cal data from Flash
Reading from Addr: 0xbffe5000
ath_attach: scn 85fc0280 sc 85ea0000 ah 85f80000
wifi0: Base BSSID 94:b4:0f:76:c8:f0, 16 available BSSID(s)
bond0 address=94:b4:0f:cf:6c:8e
br0 address=94:b4:0f:cf:6c:8e
wifi0: AP type AP-103, radio 0, max_bssids 16
wifi0: Atheros 9580: mem=0x10000000, irq=64 hw_base=0xb0000000
ath_ahb: 0.9.4.5 (Atheros/multi-bss)
ath_ahb: init_ath_wmac
Enterprise mode: 0x00000000
Restoring Cal data from Flash
Reading from Addr: 0xbffe1000
ath_attach: scn 87f80280 sc 87fa0000 ah 87fc0000
wifi1: Base BSSID 94:b4:0f:76:c8:e0, 16 available BSSID(s)
bond0 address=94:b4:0f:cf:6c:8e
br0 address=94:b4:0f:cf:6c:8e
wifi1: AP type AP-103, radio 1, max_bssids 16
wifi1: Atheros 9340: mem=0xb8100000, irq=2
shutting down watchdog process (nanny will restart it)...
Completed SW FIPS KAT test
<<<<< Welcome to the Access Point >>>>>
User: process `snmpd_sap' is using obsolete setsockopt SO_BSDCOMPAT
i am master now
(00:01:10) !!! Init ---> Master
asap_send_elected_master: sent successfully
turn off mobility
turn off mobility
turn off mobility
turn off mobility
turn off mobility