Controllerless Networks

Reply
Occasional Contributor II
Posts: 10
Registered: ‎09-16-2012

IAP 105 external web authentication

Hi,

 

In the IAP 105 there is an option for the IAP to direct the user for the web authentication to a remote web server, and to set an authentication text.

Is there any template to how the web page should send the authentication text?

 

Best regards,

Omer Shtivi

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: IAP 105 external web authentication

You can do this for the Guest network. Create a new network with the type set to Guest > use Virtual Controller assigned for the IP Address and set a static vlan if needed, then under security set the Splash Page for External - RADIUS Server.

 

See the screen capture below. Also see the Authentication chapter in the IAP User's Guide under the heading "External Captive Portal".

 

external.jpg

Occasional Contributor II
Posts: 10
Registered: ‎09-16-2012

Re: IAP 105 external web authentication

Thank you,

 

But I still doesn't get how the radius server and the web page communicate

Contributor II
Posts: 51
Registered: ‎03-21-2013

Re: IAP 105 external web authentication

Hi, did you find a template to do that?

 

Thank you

Search Airheads
Showing results for 
Search instead for 
Did you mean: