Controllerless Networks

Reply
Frequent Contributor II
Posts: 107
Registered: ‎04-15-2013

IAP 135 ENET1

I have an IAP 135 with a bad ENET0 and would like to use ENET1.  This IAP is getting converted to a Campus AP and have not had any luck getting it to work with ENET1.  Can I switch it over to ENET1 from the CLI?

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: IAP 135 ENET1

Once the IAP is converted to a controller-based AP Eth1 is disabled by default.  Eth1 is configured on a per AP group under Configuration -> AP Configuration -> Click on the AP Group you created -> AP ->Eth 1 ->Wired AP.   I would suggest creating new profiles and not using the Default.

Search Airheads
Showing results for 
Search instead for 
Did you mean: