I am trying to boot up IAP-135 however I can't get Instant.
IAP135 diplays the following:
Pwr - Green
11A/N - Amber
11B/G/N - Amber
Reset the device still can't get Instant. What could have went wrong? Please advise;
I would try recommend connecting the Laptop to the switch port to which IAP is connected to make sure we get correct ip address and able to reach the network i.e ip connectivity is good; then try connecting the IAP to see what happens. If we still have issues, please post the boot proces of IAP 135 to have a look.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.