Hello,
We have recently purchased several Aruba IAP-205H models for use in our remote sites. At some of the sites we need to connect the IAP-205H to the campus site via 4G USB modem. In our older RAP-155 models we used to set the 4G USB settings with the following CLI command on the controller:
conf t
provision-ap
read-bootinfo ap-name "RAP-155Name"
usb-type huawei-cdc
usb-dev 0x12d11506
cellular_nw_preference auto
link-priority-cellular 8
link-priority-ethernet 1
reprovision ap-name "RAP-155Name"
My question therefore is what would I use for the usb-dev code in the case of the IAP-205H ?
Many thanks in advance.
Regards Peter