Controllerless Networks

Reply
PM
Contributor I
Posts: 34
Registered: ‎09-10-2007

IAP-205H

Hello,

 

We have recently purchased several Aruba IAP-205H models for use in our remote sites. At some of the sites we need to connect the IAP-205H to the campus site via 4G USB modem. In our older RAP-155 models we used to set the 4G USB settings with the following CLI command on the controller:

 

conf t
provision-ap
read-bootinfo ap-name "RAP-155Name"
usb-type huawei-cdc
usb-dev 0x12d11506
cellular_nw_preference auto
link-priority-cellular 8
link-priority-ethernet 1
reprovision ap-name "RAP-155Name"

 

My question therefore is what would I use for the usb-dev code in the case of the IAP-205H ?

 

Many thanks in advance.

 

Regards Peter

Guru Elite
Posts: 8,641
Registered: ‎09-08-2010

Re: IAP-205H

Are you using them as IAPs or RAPs?


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
PM
Contributor I
Posts: 34
Registered: ‎09-10-2007

Re: IAP-205H

Hi Tim,

 

We will be using them as RAPS, to coonnect up to the central Campus Controller.

 

Regards Peter

Guru Elite
Posts: 8,641
Registered: ‎09-08-2010

Re: IAP-205H

Is your controller on 6.5? This new version allows for autoconfiguration of
most LTE modems.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
PM
Contributor I
Posts: 34
Registered: ‎09-10-2007

Re: IAP-205H

Hi Tim,

 

Our controller runs on version 6.4X, but would be able to upgrade to 6.5 during the next service window.

 

Regards Peter

Search Airheads
Showing results for 
Search instead for 
Did you mean: