Controllerless Networks

Reply
Occasional Contributor II
Posts: 19
Registered: ‎07-13-2013

IAP 225 Cannot Connect to existing Network

Hi Aruba Guro's,

 

         We have this new IAP225 and seems that cannot joins this to our existing network. Is anybody have some guide on how to make this work? Setup is very simple, We have our DHCP server and this IAP225 will be used as AP only. We have 3 IAP225 and this must work together. 

 

 

Your help will be much appreciated. Thanks.

Aruba Employee
Posts: 201
Registered: ‎07-14-2013

Re: IAP 225 Cannot Connect to existing Network

What version are you running? 4.0.0.4 is the recommended version for IAP225 at the current time.

Do you have APs other than 225 in your network? What specific issue are you having?

Thanks,

Yan
Occasional Contributor II
Posts: 19
Registered: ‎07-13-2013

Re: IAP 225 Cannot Connect to existing Network

Hi Yan,

 

           Thanks for your reply. Currently we dont have another Aruba AP. We are using Cisco currently and want to change to this IAP225. Please see attached screenshot.

 

           After adding new SSID, still cannot connect to the network. Tried to connect to newly created SSID, but after a minute or two the Ip add will change to 169 something. 

MVP
Posts: 146
Registered: ‎07-12-2012

Re: IAP 225 Cannot Connect to existing Network

Can you post the config you have on the iAP?

If you found my post helpful, please give kudos!
Occasional Contributor II
Posts: 19
Registered: ‎07-13-2013

Re: IAP 225 Cannot Connect to existing Network

ScreenShot067.bmp

 

ScreenShot066.jpg

 

ScreenShot065.jpg

 

ScreenShot064.jpg

Aruba
Posts: 1,377
Registered: ‎12-12-2011

Re: IAP 225 Cannot Connect to existing Network

Please upgrade this AP and retest...also post the entire config found in the Maintenance link

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
Showing results for 
Search instead for 
Did you mean: