Controllerless Networks

Reply
Occasional Contributor II
Posts: 23
Registered: ‎10-14-2013

IAP 4.0.0.1 Error

Just upgraded to the latest firmware version, getting a config verion not found in command model list error.  Any quick fixes for this?

 

config error.jpg

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: IAP 4.0.0.1 Error

 

What IAP model are you using ?

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 23
Registered: ‎10-14-2013

Re: IAP 4.0.0.1 Error

IAP 105

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: IAP 4.0.0.1 Error

Make sure you are trying to install the following version : ArubaInstant_Orion_6.3.1.1-4.0.0.1_41049

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 23
Registered: ‎10-14-2013

Re: IAP 4.0.0.1 Error

Yes that was the version I installed. 

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: IAP 4.0.0.1 Error

[ Edited ]

Are you using AirWave or Central?

Are all the IAPs in the cluster IAP-105 or is this a mixed cluster?

Are these all -US?  Country code designations just changed in this release.

You may want to open a case with TAC for diagnosis. Be sure to grab the output of "show tech support" to post to the case notes.

I just looked for any open bug matches and did not find anything.

Occasional Contributor II
Posts: 23
Registered: ‎10-14-2013

Re: IAP 4.0.0.1 Error

I have used the Instant Config on Airwave.  Have all the AP's in the same group but they are spread out at different facilities.  So basically there is 2 seperat VC with static ip's that are point back to Airwave to a community string. 

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: IAP 4.0.0.1 Error

Ah...............that is a screen capture from AirWave.  From your post it sounded like this was on the IAP.

 

AirWave does not yet have parity with IAP 4.x so I'm sure there is something in the new IAP config that AirWave does not know what to do with.  AirWave should be able to show you what the mismatch is.

Search Airheads
Showing results for 
Search instead for 
Did you mean: