Controllerless Networks

Reply
New Contributor

IAP-92 and MC3190

Problem: WiFi network of IAP-92 (7 units), implemented in warehouse of corrugated packages, ,sometimes lost a roaming possibility with MC-3190 handhelds, all 6 units in the warehouse. The problem goes on from some hours to some days and disappears without restarting, reconfiguric etc. Some suggestions?

Valued Contributor II

Re: IAP-92 and MC3190

HI,

 

Here we need to look at the Radio. IAP 92 are single radio APs. If ARM is enabled, it will play around changing the band based on the interference. work around is, disable ARM and select 2.5 GHz band manually and see how it works.

 

If the issue is still persisting advice you to open a ticket wilt TAC.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
New Contributor

Re: IAP-92 and MC3190

It was done, but situation was even worser. 

Maybe You know some MC3190 issues ir complains? Maybe some specifics in handheld configuration? Or access points should be replaced with another model?

Valued Contributor II

Re: IAP-92 and MC3190

Then I would suggest you to open a ticket with TAC.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: