Controllerless Networks

i have two IAP-93-US connected to the Cisco 3560 Switch. i configured the VC with the ip 172.16.16.8/24 and the iap-93 ip are 172.16.16.9/24 and 172.16.16.10/24 repectively. the iap-93 connection to the switch is trunk link because i have two ssids. now the problem is that i am not able to access the VC through the browser although internet is working fine. please assist me in this regard.

Can you try going to your browser using either IP ?

172.16.16.9 or 10

In the trunk did you have the access unrestricted ?

not able to access via brower and also not able to ping the 172.16.16.9 or 10

 below is the switch configuration for the access point

 

interface FastEthernet0/11
 description CONNECTION-TO-IAP93-1
 switchport trunk encapsulation dot1q
 switchport mode trunk
!
interface FastEthernet0/12
 description CONNECTION-TO-IAP93-2
 switchport trunk encapsulation dot1q
 switchport mode trunk

If you are using something else besides VLAN 1 to manage your IAPs then you need to add the native VLAN on the switch side and IAP wired port setting

but i have the same scenario in different location with iap-93 rest of the world, which is working fine, any way can you guide me how to setup this wired port setting 

You can create a new one and then added to the the port

 

i will try this in the weekend and then i will let you know, advance thanks for your assistance.

no it did not solve my problem