Controllerless Networks

Reply
Occasional Contributor II
Posts: 10
Registered: ‎11-07-2011

IAP DHCP configuration Help

Hi,

I am setting a IAP with DHCP capablites. .

 

My IAP Settings

IP = 192.168.0.13, subnet = 255.255.255.0, Gateway = 192.168.0.1

DNS = 8.8.8.8

 

DHCP Server Setting in the IAP Under Local DHCP Scope Option

Name = Demo, Type = Local,L2, Vlan = 1, Network = 192.168.2.0, Netmask = 255.255.255.240, Default router = 192.168.0.13,

DNS = 8.8.8.8.

 

I get the ip for the client device from the DHCP Scope but I am not able to reach the gateway.

I also tried Local,L3 setup but still not luck

 

Please help me to resovle it

regards

Jayakumar

 

 

MVP
Posts: 4,307
Registered: ‎07-20-2011

Re: IAP DHCP configuration Help

Please look here and see if it helps
http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-configure-Internal-DHCP-server-in-an-Aruba-Instant/ta-p/187468

What's your default gateway?

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Aruba Employee
Posts: 240
Registered: ‎03-26-2013

Re: IAP DHCP configuration Help

Hi JayaKumar,

 

Are your IAP's on routable vlan ?

 

Basically, the traffic that is destined to the Internet or local resources is source NATed using the physical IP address of the
master AP.

 

1. Are you able to reach out to the internet from IAP.

 

# ping google.com

 

2. Does the role assigned to the clients allow them to have access to internet ?

 

If yes, then check the datapath session of the IAP using client IP 

 

#show datapath session | include <client IP>

Search Airheads
Showing results for 
Search instead for 
Did you mean: