Controllerless Networks

Reply
Frequent Contributor I
Posts: 83
Registered: ‎10-28-2013

IAP DHCP

Hello,

 

My setup is :

 

Router ----->   Switch ------> IAP -----> Client

 

My router give the IP to my IAP with a DHCP.

The client IP assignment is "Virtual Controller  Assigned"

 

I have 50 clients with 10 IAP.

 

I receive a error when I new computer try to connect to the IAP. The IAP give my a alert "DHCP". Can I configure the DHCP on the IAP? What is the space for the DHCP?

 

 

Thank you

 

 

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: IAP DHCP

[ Edited ]

Are you allowing that VLAN on the IAP trunks ?

Can I configure the DHCP on the IAP?

Yes

What is the space for the DHCP?

The limitation is 512 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Moderator
Posts: 681
Registered: ‎04-16-2009

Re: IAP DHCP

What model IAP and what version of SW?

 

Can you get a screen capture of error on IAP?

Frequent Contributor I
Posts: 83
Registered: ‎10-28-2013

Re: IAP DHCP

[ Edited ]

The trunk is correct.

 

IAP 105, version:6.3.1.4-4.0.0.5_43022

 

I don't have any capture because I change my config. Now is the router give the DHCP to my IAP and my client. But I would like to know what is the problem.

 

I have a option to see what IP adress the IAP give to the client?

MVP
Posts: 1,414
Registered: ‎11-30-2011

Re: IAP DHCP

System > DHCP shows the config (need to turn on advanced options), in principe the clients screen shows the IP the client gets.

Search Airheads
Showing results for 
Search instead for 
Did you mean: