Controllerless Networks

Reply
New Contributor

IAP SSID problem.

Hi,

I have an IAP 115 which i configured for an employee network with all basic settings but it does show the SSID instant and does not broadcast the newly added SSID to the clients.

Re: IAP SSID problem.

Is the SSID hidden or disabled by any chance ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor

Re: IAP SSID problem.

SSID is shown in the GUI but not shown or detected by clients. However i have configured all things in the simplest possible way as shown in the documents.

 

Thanks for your reply.

Farooq.

Occasional Contributor II

Re: IAP SSID problem.

Try to reset the iap, else try to connect on the console, access using the ip shown in the console.
Occasional Contributor II

Re: IAP SSID problem.

Try to reset the iap, else try to connect on the console, access using the ip shown in the console.
New Contributor

Re: IAP SSID problem.

I have reset to factory a number of times , i can login through console and through GUI (ethernet port) but can not login through wifii or can not use it as a user.

 

Re: IAP SSID problem.

From console can you run the show networks command
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Aruba Employee

Re: IAP SSID problem.

It would be best to open a TAC ticket so they can help you debug; they will likely need the ?show tech-support? output in order to figure out what is going on.

Thanks,

Yan
New Contributor

Re: IAP SSID problem.

Thanks for all your replies,

The problem solved with software upgrade.

Regards.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: