Controllerless Networks

Occasional Contributor II
Posts: 17
Registered: ‎05-17-2012

IAP Wireless Site Survey

[ Edited ]

Is it possible to confgure a standalone IAP-135 for a site survey using a battery POE pack without a uplink?  Is the only option to cart around a midspan power injector with a laptop or small switch?  What are the recommended steps to configure the IAP-135?



Posts: 1,644
Registered: ‎04-13-2009

Re: IAP Wireless Site Survey

[ Edited ]

You can try setting the "Can be used without uplink" setting under the SSID (3.3 and higher).


You may need to convert the IAP to a Standalone AP to make this work.    Maintenance --> Convert --> Standalone AP.   If you do this, you may also need to set the uplink to Ethernet under Settings --> Uplink --> Uplink Preference.     Set the network up before converting it.

Systems Engineer, Northeast USA

Posts: 3,020
Registered: ‎10-25-2011

Re: IAP Wireless Site Survey

yes you can have a iap to use it as site survey...

A while ago i did a manual on how to do this




Product Manager - Aruba Networks
Alternetworks Corp
Search Airheads
Showing results for 
Search instead for 
Did you mean: