Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

IAP and lost configuration...

This thread has been viewed 3 times

  • 1.  IAP and lost configuration...

    Posted Mar 13, 2014 10:20 AM

    Hello

     

    I was wondering what could cause an IAP 225 to loose it's configuration after a normal power-off! Any idea's or experiences around?

     

    btw: the IAP had just basic configuration with one ssid secured with wpa-psk. no standalone mode. worked for 2 weeks as a single access point and was powered off...

     

    thanks


    #AP225


  • 2.  RE: IAP and lost configuration...

    EMPLOYEE
    Posted Mar 13, 2014 12:36 PM

    Config should be committed to flash upon saving, what code build are you running?



  • 3.  RE: IAP and lost configuration...
    Best Answer

    Posted Mar 16, 2014 12:24 PM

    I had once in my IAP135 but was on a much older code, after the upgrade it is fine. You may want to buckup your configure and then upgrade to the latest firmware.



  • 4.  RE: IAP and lost configuration...

    Posted Mar 18, 2014 05:22 AM

    Thanks for your contributions! Indeed the AP didn't run on the newest firmware. It's now upgraded to the newest one and we'll see if the problem is fixed...

     

     



  • 5.  RE: IAP and lost configuration...

    Posted Mar 18, 2014 06:15 AM

    Glad we can help.