Controllerless Networks

Reply
Occasional Contributor II
Posts: 16
Registered: ‎02-15-2016

IAP and switch

Sorry I would like to ask if I connect the S1500 switch with a router which have already have Internet accessibility,
the IP address is 192.168.0.1. Is that I could set the switch in the IP range 192.168.0.0/16 also,
and this could provide Internet service to the IAPs? Also, when I set up the switch, there is a Airwave setup,what is it? Is it a must to set up this?
What should be the IP set in the Airwave command?
Aruba Employee
Posts: 95
Registered: ‎09-10-2015

Re: IAP and switch

1. connect your S1500 to router, and get wired working/internet accessibility first. Then hook up the IAPs in the same VLAN.

 

2. dont worry about AirWave/AMP. Its a management platform, useful, if you have a multiple sites, and want a single config & monitoring window.

Search Airheads
Showing results for 
Search instead for 
Did you mean: