Controllerless Networks

Reply
Contributor II

IAP autojoin mode how?

so my question is...

how can I join an IAP to a cluster with no use cable...I mean using wireless

Guru Elite

Re: IAP autojoin mode how?

You need to connect them wired at least once.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II

Re: IAP autojoin mode how?

And switch off extended ssid's. After once connected by wire, place the IAP in range of at least one other IAP and you get a mesh without further configuration !!
Cheers, Frank
Aruba Partner Ambassador| AMFX#22| ACCX#613| ACMX#733| ACDX#744
Contributor II

Re: IAP autojoin mode how?

hello mrzero...

 

so I do that! but no work...

 

1. first all aruba IAP connecto to the switch...then dhcp asiggned IP address to them

2. delete Instant SSID, then created another..so all the IAP are connected to the new SSID

3. disconnect IAPs excep the master from the switch, then turn on the other IAPs

 

but not connect, so I need to do something more?

Re: IAP autojoin mode how?

What type of IAPs ?
And what InstantOS are you using ?

Sent from Outlook for iPhone
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor II

Re: IAP autojoin mode how?

IAP 225

Version 6.4.2.6-4.1.1.6_50009

Re: IAP autojoin mode how?

Mesh is supported on 802.11ac APs on InstantOS 6.4.3.1-4.2 and up
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor II

Re: IAP autojoin mode how?

so is there way to connect via wireless the IAPS to the IAP Master Controller for this version of Aruba?

Re: IAP autojoin mode how?

Yes .

Once you upgrade all your IAP to the required InstantOS to form a Mesh
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor II

Re: IAP autojoin mode how?

Thanks Man...It was solved...

 

I was Upgraded the firmware and then make the mesh like charm!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: