11-22-2017 06:03 AM - edited 11-22-2017 06:04 AM
If I have a IAP mesh with an IAP cluster behind the mesh portal can IAP's connected to a swtich behind the mesh point?
This wasn't supported a few years ago so we had to put the IAP behind the mesh point standalone mode, but I was wondering if this was supported now.
Solved! Go to Solution.
11-23-2017 09:32 AM
Sadly, it's still not officially supported. All the APs behind a mesh point would either need to be standalone or put on a different VLAN to form their own VC.
Sr. Technical Marketing Engineer