Hi All.
I Am setting up 8 IAP 205 on a network.
Wired is simple: 192.168.0.xx with a cisco router on .254 ( default GW and dhcp vlan1)
Going to install one new switch and VLan implementation
So, in this phase something like this:
Publicate Vlans on switch:
Vlan 10 Ap's+ MGMT switch ( static IP on Ap's and interface vlan 20 10.10.10.254)
Vlan 20 needs also interface IP?
Vlan 1 existing wired.
Default gW is the router 192.168.0.254
One ssid on Vlan 20, dhcp internal on aruba Virtual controller (10.10.20.xx).
Requisite is 10.10.20.xx not to see 192.168.0.1 ( by a ruleset i suppose)
Router is going to connect to the switch.
How can I have the wlan clients to go internet?
Since the switch has ports for Ap's on vlan 10 and wired on Vlan 1 , do i need to trunk the port where the provider router (dhcp for vlan 1) connects?
VC default gateway is the router correct?
Thanks