Controllerless Networks

Reply
Contributor II
Posts: 51
Registered: ‎11-02-2015

IAP with LDAP auth - Windows users

Configured a dot1x network for a customer recently and its working for everyone except windows users. Is this still valid for IAP installs?:

 

https://support.arubanetworks.com/ToolsResources/tabid/76/DMXModule/514/EntryId/114/Default.aspx

-Joey
Guru Elite
Posts: 21,491
Registered: ‎03-29-2007

Re: IAP with LDAP auth - Windows users

Skip straight to radius.  That component has not been updated in years and was created when nobody had access to a radius server.  If you have Windows, it comes with a free built in radius server.

 

The component you point to has to be installed on every Windows device, because Windows laptops do not support EAP-GTC built in..



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II
Posts: 51
Registered: ‎11-02-2015

Re: IAP with LDAP auth - Windows users

ok,   Know of a good guide for doing that on 2012? I am NOT a server guy, lol.

-Joey
Guru Elite
Posts: 21,491
Registered: ‎03-29-2007

Re: IAP with LDAP auth - Windows users

Try here:  http://community.arubanetworks.com/t5/Community-Tribal-Knowledge-Base/Step-by-Step-How-to-Configure-Microsoft-NPS-2008-Radius-Server/ta-p/80672



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: