Controllerless Networks

Reply
BBB
Occasional Contributor II

IAP104 fails to convert to Mobility Controlled

Hi,

 

I am gtrying to convert an IAP to work from a Controller, However, although it claims it is connecting to the controller I see no proof of this and then an error message returns "Image Verify Failed".   The controller is running 6.1.2.3 is there something I am missing?

 

Moderator

Re: IAP104 fails to convert to Mobility Controlled

The IAP needs to be running 3.0 or higher.

 

The controller needs to run AOS 6.1.4.x or AOS 6.2.0.2. 

BBB
Occasional Contributor II

Re: IAP104 fails to convert to Mobility Controlled

On the download page the general availability is only upto 6.1.3.6 . Am I just not getting all versions or is this not available yet.  I can only get 6.2 releases in the early release category. I wouldn't want to put this into a customer environ yet.

Moderator

Re: IAP104 fails to convert to Mobility Controlled

6.1.4 was a limited release / technology release.   You need to open a case with TAC to get a copy.

 

Between 6.1.4 and 6.2.0.2, and above, I would go with 6.2.0.2.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: