Controllerless Networks

last person joined: 18 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

IAP105 Bridge Wireless

This thread has been viewed 1 times

  • 1.  IAP105 Bridge Wireless

    Posted Mar 06, 2014 09:46 AM

    Hi ALL,

    does IAP 105 support bridge wired traffic through mesh mode?

     

    I'm trying to configure it as described in the following note, but it doesn't work.

     

    https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-1666

     

    I have my Instant Cluster (2 x IAP105 running 6.2.1.0) and it works perfectly.

    I enable the Eth0 bridging on  1 IAP105, I reboot it and I disconnected it from the network.

    After these operations the AP reboots continuosly and it doesn't work.

     

    Regards,

    Gian

     

     

     



  • 2.  RE: IAP105 Bridge Wireless

    Posted Mar 06, 2014 04:30 PM

    Hi, 

    I've tested it with latest code at IAP105. There were some improvements I guess :) Could you upgrade to 4.0? 

    Many regards, 

    Marek 

     



  • 3.  RE: IAP105 Bridge Wireless

    Posted Mar 07, 2014 03:06 AM

    I have investigated about the issue... the problem is the mesh.

     

    If I disconnect the IAP from the network (before enabling the bridge in the wired eth), it is not able to contact the other IAP via mesh.



  • 4.  RE: IAP105 Bridge Wireless

    Posted Mar 07, 2014 03:33 AM

    Have you enabled Extended SSID? If so, please disable, otherwise MESH does not work. 

    HTH