Hi ALL,
does IAP 105 support bridge wired traffic through mesh mode?
I'm trying to configure it as described in the following note, but it doesn't work.
https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-1666
I have my Instant Cluster (2 x IAP105 running 6.2.1.0) and it works perfectly.
I enable the Eth0 bridging on 1 IAP105, I reboot it and I disconnected it from the network.
After these operations the AP reboots continuosly and it doesn't work.
Regards,
Gian