Controllerless Networks

Reply
Occasional Contributor II

IAP105 Bridge Wireless

Hi ALL,

does IAP 105 support bridge wired traffic through mesh mode?

 

I'm trying to configure it as described in the following note, but it doesn't work.

 

https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-1666

 

I have my Instant Cluster (2 x IAP105 running 6.2.1.0) and it works perfectly.

I enable the Eth0 bridging on  1 IAP105, I reboot it and I disconnected it from the network.

After these operations the AP reboots continuosly and it doesn't work.

 

Regards,

Gian

 

 

 

Frequent Contributor I

Re: IAP105 Bridge Wireless

Hi, 

I've tested it with latest code at IAP105. There were some improvements I guess :) Could you upgrade to 4.0? 

Many regards, 

Marek 

 

Marek Krauze, CWNE# 174, ACMX #295, ACDX #356
Something cool, helpful or interesting in my post - click the Kudos Star.
Helped to solve your problem - Click Accept as Solution
Occasional Contributor II

Re: IAP105 Bridge Wireless

I have investigated about the issue... the problem is the mesh.

 

If I disconnect the IAP from the network (before enabling the bridge in the wired eth), it is not able to contact the other IAP via mesh.

Frequent Contributor I

Re: IAP105 Bridge Wireless

Have you enabled Extended SSID? If so, please disable, otherwise MESH does not work. 

HTH

Marek Krauze, CWNE# 174, ACMX #295, ACDX #356
Something cool, helpful or interesting in my post - click the Kudos Star.
Helped to solve your problem - Click Accept as Solution
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: