Controllerless Networks

Reply
Frequent Contributor I

IAP305 Issue

Newly installed cluster of 40 IAPs (v6.5.4.2). Replaced AP125's with 3400 controllers.. no issues for years.. replaced the AP125's with IAP305's.  Put AP's in the exact locations of the existing ones.  We notice the coverage is worse.  People complaining of low signal strength even when they are not even 40 feet away from the AP.  Could be interference but nothing seems to be inbetween.  We have the min/max transmit power set on 9/12 and client match enabled.  We just order Airmagnet to help us determine the issue.  Is there anything in the config we can tweak to help?

Guru Elite

Re: IAP305 Issue

I would add 3 to the ARM min and max tx power and see if you still have an issue.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I

Re: IAP305 Issue

so instead of 9/12..make it 12/15?

Guru Elite

Re: IAP305 Issue

Yes.  See if that makes a difference.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: