Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

IAP315 converting to CAP

This thread has been viewed 3 times

  • 1.  IAP315 converting to CAP

    Posted Apr 17, 2018 10:04 AM

    I am having an issue converting an IAP315 running 6.5.0.3 code to a CAP with the controllers running 6.5.1.5. Every time I go about doing this, the "Retrive image failed" error comes up.

     

    Everything is on the correct vlan, and the AP is currently i nthe same building as the controller.



  • 2.  RE: IAP315 converting to CAP

    EMPLOYEE
    Posted Apr 17, 2018 11:40 AM

    Does the controller have CPsec enabled?



  • 3.  RE: IAP315 converting to CAP

    Posted Apr 17, 2018 11:45 AM
    I am unsure. I will say, there are about 1000 other IAPs that were moved to
    this controller. All 315s.


  • 4.  RE: IAP315 converting to CAP

    Posted Apr 17, 2018 12:23 PM
    Can you ping the controller from the AP?

    Do you have enough licenses ?

    Do you have CPSec turned on ?

    Run the following command on the controller : show log system all | include
    The logs may reflect the reason the AP is not able to fully get converted