Controllerless Networks

Reply
Contributor I

IAP93 COnsole

Hi Forum,

 

I want to purge  the IAP93 using console but i can't get its console.   I turned on  IAP93 using DC Adapter, take serial cable and connect its serial part of cable into PC serial port and then connect RJ45 cable into Console port of IAP93 and use Hyper terminal for console access but i can't get  any access there is nothing in hyper terminal window.   I want IAP 93 to purge rather than reset it.

 

Solve my ISsue.

 

Regards,

Faisal

Guru Elite

Re: IAP93 COnsole

You need to make sure the terminal is set:

 

9600

N

1

No Flow control

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Contributor I

Re: IAP93 COnsole

Yes it is by default, but still cannot access

Guru Elite

Re: IAP93 COnsole

Does it work with a controller or a different IAP93?

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Contributor I

Re: IAP93 COnsole

It doesn't work with controller

Guru Elite

Re: IAP93 COnsole

So I guess the problem is with your console cable or terminal configuration... :(

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: