Hi all, we have 205hx3 in cluster mode, on all AP`s we have arm and rf conf :
arm wide-bands all 80mhz-support 160mhz-support auto min-tx-power 12 max-tx-power 127 band-steering-mode prefer-5ghz air-time-fairness-mode preferred-access client-aware scanning client-match client-match nb-matching 80 client-match calc-threshold 40 client-match calc-interval 10 client-match slb-mode 3 rf dot11g-radio-profile spectrum-monitor dot11h interference-immunity 5 csa-count 10 max-tx-power 127 min-tx-power 127 rf dot11a-radio-profile spectrum-monitor dot11h interference-immunity 5 csa-count 10 max-tx-power 127 min-tx-power 127
But we have 5GHz base enabled only on one of APs. What we can do for get 5GHz base on all of our APs?
Did this ever work? What version of InstantOS and what is your regulatory domain.
First, you should simplify your configuration. Remove:
spectrum-monitor dot11h interference-immunity 5 <<--should be 2 csa-count 10
On the APs where it does not work, please run the command "show ap bss-table" and paste that output as a reply here.
@cjoseph wrote:On the APs where it does not work, please run the command "show ap bss-table" and paste that output as a reply here.
where it works - we have 4 interfaceslike here:
wifi-aruba-1# show ap bss-table Aruba AP BSS Table ------------------ bss ess port ip phy type ch/EIRP/max-EIRP cur-cl ap name in-t(s) tot-t --- --- ---- -- --- ---- ---------------- ------ ------- ------- ----- a8:bd:27:00:ad:e0 ESS1 ?/? 192.168.78.17 g-HT ap 11/19.7/19.7 0 wifi-aruba-1 0 6h:6m:58s a8:bd:27:00:ad:e1 ESS2 ?/? 192.168.78.17 g-HT ap 11/19.7/19.7 3 wifi-aruba-1 0 6h:6m:58s a8:bd:27:00:ad:f0 ESS1 ?/? 192.168.78.17 a-VHT ap 132E/26.0/26.0 3 wifi-aruba-1 0 6h:6m:59s a8:bd:27:00:ad:f1 ESS2 ?/? 192.168.78.17 a-VHT ap 132E/26.0/26.0 2 wifi-aruba-1 0 6h:6m:58s
on two another:
wifi-aruba-3# show ap bss-table Aruba AP BSS Table ------------------ bss ess port ip phy type ch/EIRP/max-EIRP cur-cl ap name in-t(s) tot-t --- --- ---- -- --- ---- ---------------- ------ ------- ------- ----- a8:bd:27:00:ab:80 ESS1 ?/? 192.168.78.18 g-HT ap 9/19.7/19.7 0 wifi-aruba-3 0 6h:5m:2s a8:bd:27:00:ab:81 ESS2 ?/? 192.168.78.18 g-HT ap 9/19.7/19.7 2 wifi-aruba-3 0 6h:5m:2s
You should type "show log driver" on the affected APs to see if the device initialized properly. In practice, you should not have to do that..
@cjoseph wrote:You should type "show log driver" on the affected APs to see if the device initialized properly. In practice, you should not have to do that..
log from ap with 2 interfaces
Attachment(s)
Oh, big thanks for helping, rly, im use
wifi-aruba-2# no dot11a-radio-disable
and interfaces upped :)
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.