Hi
So looking at the two screen shots you sent through.
Both LgeConf and SrvWest are running on Channel 11 and may be interesting with each other depending on how far apart they are.
You also note that SrvWest is reporting that the noise level is very high. This could be caused by interference from LgeConf or from other surrounding AP's that are in your area.
In the RF options at the top of the instant is Band Steering Mode set to prefer 5Ghz. This can encourage devices that support both 2.4ghz and 5ghz to connect on 5ghz where you will probably have a lot more free channels around then on 2.4ghz where you only have three non overlapping channel to use.
In the RF settings if you click on the advanced settings you can also change the interference immunity levels which can also help for the AP's to work out what channel is the best for them to work to try and reduce interference.
I hope that helps.
Ryan