03-09-2017 08:14 AM
This coursework covers Aruba Instant management using the integrated virtual controller user interface. Choose this option if you are using your Instant access points without external management. These training courses are ideal for techies who want a deep-dive into the rich functionality of Aruba Instant or are on the path to technical certification.
Get the latest on Instant AP (IAP) features and benefits including GUI basics, clusters, Virtual Controller (VC), the VC election process and more!
Get the basics on WLAN configuration including WLAN Wizard and WLAN Settings, possible VLAN selections, authentication options, Instant SSID and zone setup
Get an introduction to the necessities for Guest Access, including configuring a Captive Portal WLAN and VLAN Assignment, Guest Roles used to limit corporate access and more.
Learn the basics of Access Rules, the difference between Unrestricted Access, Network and Role-based rules, using Application-based rules, and more.
Get an introduction to the Main GUI page, Client View for monitoring use, Support Commands, the basics of using IAP Logs and more.
Get an introduction to ARM features and benefits including ARM Scanning and ARM Indices used for optimal power and channel selection.
Get an overview of the basics of Mesh Setup and Outdoor Mesh options, Wired Access options and configuration, Uplink options and more.
Learn the basic differences between L2 and L3 roaming, roaming within a cluster, and ways of creating a Home AP (HAP) Table manually or dynamically.
Discover the basics of IAP VPN deployment for branch office and home environments using different VPN tunneling protocols (Aruba IPsec, Aruba GRE, Manual GRE, & L2TP).
Get basic explanation of DHCP options including, DHCP Local, DHCP Centralized (L2/ L3), and DHCP Distributed (L2/ L3) configurations. IAP troubleshooting basics are also provided.
Learn why wireless IPS and IDS security types are required, various classifications for wireless devices, the different types of attacks, and how Rogue Detection works.
Get the fundamentals on firmware versions, how to upgrade IAPs, how to configure backup and restore, how to reset an IAP and more!
Airheads Community - The best place to Connect. Engage. and Learn.
Re: Instant Training
Re: Instant Training
07-02-2018 11:33 AM
Hello! Good day. Just took delivery of some 15 Units of IAP 205 RW. I plug to a Cisco switch, it powers on, 2.4GHz network is active, and 5GHz amber. I connect to the "Instant" network created. As soon as I log into the web interface, the 2.4GHz network dissapears and goes amber. Same for some 3 other units I tested. What could be happening? What am I not doing right. I have gone in via CLI, assigned IP addresses, and still same challenge. I suspect I am missing something. Help.