Controllerless Networks

Reply
Occasional Contributor II
Posts: 37
Registered: ‎06-18-2014

Is it possible to design a mesh work with Power ethernet?

Hi,

 

I would like to make a mesh network with 225IAP, but i don't know why it dosen't works. I connect all of them in a switch to take the config wihile wired. Then I rebot one of them without wired connection but it dosen't take the config from VC.

 

Do you know the problem is because I connected all of them in a Poe adapter? Can the APs works in a mesh system with POe adapters?

 

Thanks for all,

 

 

MVP
Posts: 4,307
Registered: ‎07-20-2011

Re: Is it possible to design a mesh work with Power ethernet?

Mesh is currently not supported for the AP225

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Moderator
Posts: 681
Registered: ‎04-16-2009

Re: Is it possible to design a mesh work with Power ethernet?

Mesh is coming to the AP-22x / -27x later this year.

New Contributor
Posts: 1
Registered: ‎11-10-2014

Re: Is it possible to design a mesh work with Power ethernet?

Any updates on when mesh will be supported on the 225?

Search Airheads
Showing results for 
Search instead for 
Did you mean: