Controllerless Networks

Reply
New Contributor

Managing IAPs in AirWave

Greetings! I am working on migrating my IAP swarms to AirWave.

 

I have set up a group and configured options via the Instant Config menu. I then moved a 2-device swarm to that group.  I would like to push changes to the devices, but so far that is not happening.

 

If I click on VC List, I see the VC; however it seems to be stuck at 'Requesting running config'.  It does show the 8 Overrides that I would like to push.  (Screen shot attached)

 

Further, if I click Monitor, it shows 3 devices (correct, 2 IAPs and one VC).  But if I go back under Instant Config, Access Points, the devices are not there for me to manage.

 

Can anyone help me with what I am missing?

Thanks!

VC.JPG

Re: Managing IAPs in AirWave

Please follow the instructions in the Instant VRD
https://community.arubanetworks.com/aruba/attachments/aruba/Aruba-VRDs/76/2/Aruba_Instant_VRD_2016.pdf
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor

Re: Managing IAPs in AirWave

Thanks Victor, I'll check it out.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: