Controllerless Networks

Reply
New Contributor

Mesh on 2.4 GHz

Mesh with two IAP-277 on 5 GHz Band is unstable due to radar activity nearby.

 

Is there a possibility to mesh on 2.4 GHz?

 

*********************************************************************************************************
6/28/2017 12:40:27 PM Target: AP01 Command: show ap arm history
*********************************************************************************************************

Interface :wifi0
ARM History
-----------
Time of Change Old Channel New Channel Old Power New Power Reason
-------------- ----------- ----------- --------- --------- ------
2017-06-28 11:36:00 116E 100E 30 30 R
2017-06-28 11:35:08 100E 116E 30 30 I
2017-06-28 10:58:14 116E 100E 30 30 R

 

 

Guru Elite

Re: Mesh on 2.4 GHz

If this in instant, unfortunately mesh is only available on the 5ghz band.  Are you forced to use DFS channels because of your regulatory domain?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor

Re: Mesh on 2.4 GHz

Yes, Germany Outdoor
Guru Elite

Re: Mesh on 2.4 GHz

Try to do 20mhz channels, instead of 80mhz channels.  



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite

Re: Mesh on 2.4 GHz

I am saying that because you could be seeing a false positive, and those are less likely to happen on 20mhz channels in my experience.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: