In the firmware 6.5.0.0-4.3.0.0, the aruba WAP allows users to set EIRP which can exceed the defined MAX EIRP. For ex: when MAX EIRP is set to 13dBm, it allows us to set the EIRP upto 15dBm.
The below log shows the MAX EIRP and the current EIRP:
18:64:72:c8:4f:ac# a-channel 149 15
18:64:72:c8:4f:ac# show ap bss-table
Aruba AP BSS Table
------------------
bss ess port ip phy type ch/EIRP/max-EIRP cur-cl ap name in-t(s) tot-t
--- --- ---- -- --- ---- ---------------- ------ ------- ------- -----
18:64:72:04:fa:d3 xbu15_test4 ?/? 172.29.15.225 a-VHT ap 149/15/13 0 18:64:72:c8:4f:ac 0 47m:52s
18:64:72:04:fa:c3 xbu15_test4 ?/? 172.29.15.225 g-HT ap 11/5/13 0 18:64:72:c8:4f:ac 0 48m:25s
Channel followed by "*" indicates channel selected due to unsupported configured channel.
"Spectrum" followed by "^" indicates Local Spectrum Override in effect.
Num APs:2
Num Associations:0
18:64:72:c8:4f:ac#
This is a bug in the latest aruba software release which is a violation of EU regulation. Can someone confirm and look into it?