I have a few of these IAP-93's throughout my building, and for some reason, they don't have the exact same configuration. If the one that is the current master, loses power, or is somehow reset, another one becomes the master. Which ordinarily would be fine, except, of the 14 we have, maybe 5 have the right admin password. The other 9 have a password set by my predecessor, of which I was not privy to when he left. So to regain access to the AP's I have to recycle power on them one at a time, until I get one to be the master that has the right password set.
So, my question... How do I copy the configuration from one of the good access points to all the other ones. As long as the one with the good password is a master, I can telnet into the others.
<edit> Correction. I cannot telnet the ones I don't have a good password for. Looks like i'm going to have to factory reset them, and somehow keep them from gaining their configuration from the master device before I can get into them to set the password. Too bad I can't CLI on the instant devices.... Any ideas? Anyone?