Controllerless Networks

Reply
Occasional Contributor II

Point-to-Point Bridging with IAP-277

Dear All,

I want to config "Point-to-Point Bridging" with two IAP-277 Model like below.

IAP-277 Sample Config.JPG

1. Would you tell/help me about detail procedures to config on IAP-277?

or

2. Someone have sample configuration before done this kind of Point-to-Point Bridging setting, Please send me.

 

Thanks.

 

 

Re: Point-to-Point Bridging with IAP-277

Search the site for instant mesh and instant bridging. There are dozens of pages on Community that give step by step instructions.

Jerrod Howard
Sr. Technical Marketing Engineer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: