Controllerless Networks

Reply
Occasional Contributor I

Port forward/Destination NAT inbound Traffic on Instant RAP

A solution we are using contains a PoE surveillance camera connected to a RAP with a USB cellular data card.  We have dynamic DNS for the public address assigned to the RAP.  When connecting to HTTPS://dynamicDNS/ we are redirected to HTTPS://dynamicDNS:4343/ and the administration page so obviously there is an ACL with Dest NAT already configured on that interface.  

 

Is it possible to modify the ACL attached to the "Uplink" (USB data) interface to add/change a destination NAT for inbound HTTPS to our web camera? 

 

Thanks,

Ben Russell

PacketLogix Engineering - ACMP, ACCP

Aruba Employee

Re: Port forward/Destination NAT inbound Traffic on Instant RAP

This is not unique for the Instant plaform but ArubaOS h/w as well. The DNAT param to the device ip is locked at code and cannot be changed.

Barath Srinivasan
Customer Engineering Architect
Customer Advocacy | Aruba Networks Inc.
-----------------------------------------------------------------------------------------------------------
Did something you read in the Community solve a problem for you? If so, click "Accept as Solution", in the bottom right hand corner of the post.
-----------------------------------------------------------------------------------------------------------
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: