10-04-2014 01:21 AM
I've been digging into this thing and I'd really like to enable MAC filtering simply as another layer of security. However, it's starting to look like it's not possible in Standalone mode. Can anyone confirm, or point me in the right direction on how to configure this correctly for mac filtering in standalone mode?
Solved! Go to Solution.
10-04-2014 03:59 AM
If you do then you should be able to
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
10-04-2014 01:43 PM
Yes, it's in instant mode. Can you please walk me through how to create a MAC filtering list? The understanding I'm getting is that it looks like you can't do it in standalone mode. Everything I've read sounds like mac filtering has to be done on the controller.
10-12-2014 02:29 PM
10-12-2014 05:16 PM
10-13-2014 03:48 AM
Don't listen to anyone who says MAC filtering isnt a good solution...
We tried everything here until finally implimented MAC filtering and its made the world of difference. It gives you so much control and has been bullet proof so far in terms of security.
It has worked very well here.