Controllerless Networks

Reply
SJ
New Contributor
Posts: 4
Registered: ‎08-09-2014

RAP as a client to 802.1x SSID

The uplink port does not support 802.1x on the RAP. 

 

Is it possible to connect to an AP that uses 802.1x for authentication with a RAP in Open auth?  I would let the RAP associate to the AP, but then forward 802.1x from a laptop connected to the Ethernet port of the RAP.  Would Eth0 bridging help do this?  Or not possible?

 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: