Controllerless Networks

Reply
New Contributor

Regenerate PoE Licenses for legacy Aruba 620

Hello,

I have an old Aruba 620 unit that came into my team's network lab recently. Unfortunately, I erased the licenses off the controller during reconfiguration, and now PoE no longer runs off the box. Additionally, we were not given the power adaptors and our setup requires PoE to run the APs. 

As the 620 has been EOS'd and the old licensing webpage is defunct (http://licensing.arubanetworks.com), is there anyway for me to regenerate the licenses for this unit?

 

Thanks any and all assistance.

Guru Elite

Re: Regenerate PoE Licenses for legacy Aruba 620

Type "dir" on the commandline to see if there is a flashbackup.tar.gz file.  If there is, maybe it has a license.  Do a "restore flash" and reboot to see if the licenses reappear.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
New Contributor

Re: Regenerate PoE Licenses for legacy Aruba 620

Backup file was still intact, and reboot worked like a charm. Thank you so much!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: