Controllerless Networks

Reply
New Contributor

SNMP OID for Number of Clients.

Dears;

 

Anyone know the SNMP OID for  Number of Clients.

Best Regards

Nadeem

Aruba

Re: SNMP OID for Number of Clients.

 Total Number of users on a paricular controller: 

 

  • .iso.org.dod.internet.private.enterprises.aruba.arubaEnterpriseMibModules.switch.wlsxEnterpriseMibModules.wlsxUserMIB.wlsxUserAllInfoGroup.wlsxTotalNumOfUsers
  • .1.3.6.1.4.1.14823.2.2.1.4.1.1

 

You can view the OIDs using a MIB Browser.   The user related information is in the aruba.my file within the attached Aruba MIBs archive.

 

------------------------------------------------
Systems Engineer, Northeast USA
AMFX | ACCX | ACDX | ACMX

New Contributor

Re: SNMP OID for Number of Clients.

We've been polling our controllers using that SNMP string, but have noticed that the SNMP poll reports a much higher number of clients that what is seen in the gui of the controller.  Anyone else seeing this?  Any reason or explaination as to why?

Guru Elite

Re: SNMP OID for Number of Clients.

BriFi,

 

Have you already opened a case?  What version of ArubaOS and what MIB are you polling?

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
New Contributor

Re: SNMP OID for Number of Clients.

Hi, we notice this number is way higher than the number of clients reported in the UI. Even after the latest firmware update to 6.4.2.12 on a 7030 controller.

 

Is this a confirmed bug? What number should be trusted?

 

SNMPv2-SMI::enterprises.14823.2.2.1.4.1.1.0 = Gauge32: 305

Regular Contributor I

Re: SNMP OID for Number of Clients.

Did this issue conclude? 

wlsxTotalNumOfUsers - does it show the number of entries in the user-table or from the station table? 

Re: SNMP OID for Number of Clients.

wlsxTotalNumOfUsers is the user table, possible for there to be multiple entries per mac address (e.g. per station)

 

wlanAPNumClients and wlsxWlanStationTable are station related entries, one per mac address

 

see some examples here in another thread

 

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: