04-13-2014 08:27 PM
I am using Aruba Instant IAP-105's. We have more then a 1000 of these models deployed in the environment. I have been using ArubaOS Version 126.96.36.199-188.8.131.52 firmware at most locations. The exisiting configuration has 2 SSIDs where one has WPA2 phassphrase and the other has RADIUS with Dynamic radius configured. I have scripts that use 'snmpwalk' to query the virtual controllers at multiple sites for details of attached AP's. I recently tested a newer firmware 184.108.40.206-220.127.116.11_40930 and noticted that the VC does not respond to any queries. The master controller does respond to the snmp query but the master controllers are dynamic.
My script usees VC ip which is set to static on every subnet.
Is there any way of enabling this.
04-22-2014 06:07 AM
for more information.
The issue is that if you SNMPWALK the VC IP, whoever is acting as VC will reply, not the VC IP.
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]