Controllerless Networks

Reply
New Contributor

SNMP monitoring SSID radio interfaces

Hello,

 

I’m trying to monitor the our Aruba 115 IAPs and SNMP walking the ifTable it shows several different interfaces: 

IF-MIB::ifDescr.1 = STRING: eth0

IF-MIB::ifDescr.50 = STRING: radio0_ssid_id0

IF-MIB::ifDescr.52 = STRING: radio0_ssid_id2

IF-MIB::ifDescr.54 = STRING: radio0_ssid_id4

IF-MIB::ifDescr.72 = STRING: radio1_ssid_id2

IF-MIB::ifDescr.73 = STRING: radio1_ssid_id3

IF-MIB::ifDescr.74 = STRING: radio1_ssid_id4

IF-MIB::ifDescr.75 = STRING: radio1_ssid_id5

 

I get interface counters for all of the above interfaces, so all is well.

What I’m trying to do is to find out what SSID those radio ID’s map to.

 

For example, if we have 4 SSID’s (WIFI1/2/3/4), how do I know if radio0_ssid_id0 = WIFI1 SSID ?

Also, why does it display ssid_id2  and ssid_id4 twice (different radio0/1), but not the rest?

 

Using the Aruba MIBs its fairly easy to pinpoint the broadcasted SSIDs, but if I can monitor counters on the radio interfaces PER SSID and PER access point, that could be very handy for graphing and monitoring. Unfortunately, they don’t seem to line up: 

AI-AP-MIB::aiSSID.0 = STRING: WIFI1

AI-AP-MIB::aiSSID.1 = STRING: WIFI2

AI-AP-MIB::aiSSID.2 = STRING: WIFI3

AI-AP-MIB::aiSSID.3 = STRING: WIFI4

 

I would have hoped to have seen .52 = WIFI1    .52 = WIFI2, etc etc

Any help would be appreciated.

Thanks,

Phill.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: