The SSIDs are for a Science and Technology park that incubates startups and hosts business innovation centers.
All the startups have a virtual network (VLANs and SSIDs) on a shared network infrastructure.
In practice if I could associate a SSID just to one IAP the maximum SSIDs on a single AP would be 7.
That’s the reason I´ve the IAP on a standalone mode. But I have strange behaviors, like clients complaining that after one or two hours of wifi connectivity they lose it and take some minutes to connect again.
Last hour I was checking arm parameters and channels changings when I found out that the ntp wasn´t configured. When I configure NTP I figure out that I need to reboot the AP to the system time be updated :smileysad:, is this a feature or some bug?
After synchronize the clocks I´ll investigate the logs , as I think that I´ve to change some arm parameters, because of interference or the prefer bands options are not working well.
They running 6.3.1.1-4.0.0.1 software version
--------------------------
Aruba Operating System Software.
ArubaOS (MODEL: 225), Version 6.3.1.1-4.0.0.1
Website: http://www.arubanetworks.com
Copyright (c) 2002-2013, Aruba Networks, Inc.
Compiled on 2013-11-26 at 13:57:54 PST (build 41049) by p4build