Controllerless Networks

Reply
New Contributor
Posts: 2
Registered: ‎12-02-2015

Template mismatch in Aruba Instant VC 6.4.2 for cp-logo-checksum

In my Aruba Instant Virtual Controller - 6.4.2.6-4.1.1.6_50009 template there is a mismatch that looks like this:
Actual  cp-logo-checksum d15.... (there's a very long string after the checksum)

This would appear to be caused by uploading a company logo when I was creating a captive portal for a guest SSID I created for testing. I ultimately deleted the SSID, but it appears the uploaded logo didn't get erased.

In looking into how to get rid this, I cannot find the commands in the config to delete it. There is a reference in the 6.4 CLI reference guide for the following command: "apply {cplogo-install| cplogo-uninstall" but our virtual controller CLI doesn't recognize the "apply" command.

Does anyone know how to get to this setting in the CLI or the GUI?  Thanks! 

New Contributor
Posts: 2
Registered: ‎12-02-2015

Re: Template mismatch in Aruba Instant VC 6.4.2 for cp-logo-checksum

Found the answer for this and all template mismatches. Under Groups>Templates for the device you can fetch the new template that reflects any changes made.

Search Airheads
Showing results for 
Search instead for 
Did you mean: