Controllerless Networks

Reply
Occasional Contributor II

Tunnel Node

Dear All,

 

I have controller running on AOS 6.5.4.3, type 7030,

 

switch 2930F with stacking vsf with firmware 16.03,

 

and clearpass as radius 802.1x wired,

 

i have already configure 802.1x and successfully login with username at my active directory,

 

but when I assign that port with tunnel node, it pop up notif, cannot enable tunnel node when port authenticator enable,

 

i read in ase.arubanetworks.com tunnel node can enable with authentication 802.1x , where I am wrong the configuration ?

 

Screenshot (678).png

 

please advice....

Guru Elite

Re: Tunnel Node

You cannot have the "aaa port-access authenticator" command configured for the port.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II

Re: Tunnel Node

Dear Cappalli,

 

So , what should i do sir ?

 

if I remove the aaa port auth, the device wont have authentication 802.1x ?

 

kindly need your advice

Guru Elite

Re: Tunnel Node

Please look at the ClearPass Solution Guide for Wired Policy Enforcement.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480