Controllerless Networks

Reply
Occasional Contributor I
Posts: 8
Registered: ‎10-10-2014

VC at 100% CPU utilization, lots of memory free

Screen Shot 2015-02-05 at 9.04.21 AM.png

What can be causing this issue? Our CPU of VC is showing 100% with a lot of free memory. The wireless test at location is still fast but this does seem to effect ability to get into VC to manage it. We upgraded firmware to 6.4.2.3-4.1.1.2_48114 one week ago that is only change. We went back in firmware at some locations and that seemed to fix this problem. Does anyone have any other fixes instead of down grading firmware?

MVP
Posts: 1,437
Registered: ‎10-25-2011

Re: VC at 100% CPU utilization, lots of memory free

I have also seen with this firmware that APs were all broadcasting on the same 5Ghz channel (IAP-225), downgraded it went away. That was the extent of the troubleshooting but more is required.

For your case, try rebooting the cluster to see if it changes, if not, I would open a TAC case so they can identify a bug or not.
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: